Perfect For Arc Flash Labels
Die-Cut Series Thermal Transfer Labels
3.2 mil gloss die-cut vinyl with high-tack permanent acrylic pressure sensitive adhesive laminated to a 50# liner.
This product is recommended for outdoor and indoor uses where a marking film with flexibility, durability and resistance to chemicals and sunlight is required. Compatible with most thermal-transfer printers. Test prior to production.
Film: 3.2 mils
Adhesive: 1.0 mil
Liner: 2.5 mils
Minimum application temperature: +35 °F
Service temperature range: -50 °F to +165 °F
Stainless Steel: 112 oz/in² when tested in accordance with PSTC-1 with 24-hour dwell. Individual values may vary. Test thoroughly before production.
Limited immersion resistance. Test for specific application.
Shelf Life: 1 year when stored at 70 °F and 50% relative humidity.
Service Life: 5 years under normal exposure conditions. Ink based header is rated for up to 2 years outdoors.
*Trademarks used on this website are the property of their respective owners. Click here to view full trademark disclaimer.